Engineered to commercial specifications, VMAX POWER (by Beijing Multifit Electrical Technology Co., Ltd.) delivers field-proven, OEM/ODM customizable solar electronics built under rigorous ISO and IEC compliance standards.
Factory-matched, turnkey photovoltaic packages spanning residential to C&I micro-grids. Features single BOM procurement and pre-tested interoperability.
Get Factory Quote
Automated, water-free and wet-wash cleaning robotics engineered to mitigate harsh soiling losses, optimize LCOE, and safeguard rooftop arrays.
Request Technical Specs
Dual-headed, high-torque counter-rotating cleaning assemblies engineered for distributed O&M teams, ensuring module surface safety.
View OEM Pricelist
Heavy-duty toroidal transformer-based power inverters built with 32-bit DSP architectures, offering 300% surge capacity for inductive industrial loads.
Inquire Industrial Specs
Intelligent hybrid energy storage converters supporting peak shaving, UPS zero-transfer switching, and dynamic CAN/RS485 BMS integration.
Request Wholesale Pricing
High-power-density, lightweight pure sine wave converters optimized for compact residential installations and telecommunication backup systems.
Explore Models
Deep-cycle LiFePO4 and engineered gel battery banks providing extended cyclic endurance, robust thermal stability, and integrated cell-level BMS telemetry.
Download Battery Specs
Integrated intelligent balance-of-system solutions combining real-time generation metrics with automated O&M cleaning scheduling.
Request Clean System KitThe global push toward renewable microgrids and localized industrial generation demands customizable, fault-tolerant electronic sub-assemblies capable of thriving under unstable grid conditions.
Global industrial hubs face frequent brownouts, harmonic distortion, and reactive power surges. Standard consumer-grade inverters routinely fail under continuous heavy inductive stress. Tier-1 buyers require customizable power electronics with integrated toroidal low-frequency transformers, galvanically isolated stages, and adaptable firmware capable of ride-through support.
In high-irradiance zones like the Middle East, North Africa, and Central Asia, dust and particulate accumulation cause solar array efficiency losses exceeding 30%. Manual washing exposes personnel to extreme heat and introduces mechanical module damage. Scalable cleaning robotics and mechanized brushes have become indispensable capital investments for long-term project ROI.
EPC contractors regularly face warranty disputes and communication bottlenecks when integrating inverters from one vendor, lithium batteries from another, and balance-of-system controllers from a third. Direct wholesale manufacturing with single-architecture BMS, MPPT, and inverter matching delivers lower balance-of-system costs, optimized commissioning, and seamless technical traceability.
Entering international electrical markets demands strict adherence to safety topologies, electromagnetic compatibility, and verifiable testing standards.
Every customizable inverter and controller unit satisfies EU LVD 2014/35/EU and EMC Directive 2014/30/EU, ensuring baseline electrical clearance and zero harmful harmonic feedback.
Conforms to international benchmarks for power conversion equipment in photovoltaic systems, evaluating insulation resistance, arc fault interruption, and thermal limits.
Multi-stage quality control from component-level automated optical inspection (AOI) to 72-hour full-load burn-in testing under controlled environmental conditions.
Customizable parameters for regional utility constraints: voltage windows, frequency tolerances (50Hz/60Hz autodetect), anti-islanding parameters, and remote RS485 communication protocols.
From extreme desert climates to high-humidity island microgrids, our customizable electronics are deployed across demanding environments worldwide.
Deployment: Middle East, North Africa, Western Australia.
Technical Configuration: High-efficiency PV modules integrated with autonomous dry-cleaning robots and IP65-sealed inverters. Eliminates freshwater reliance and optimizes baseline generation across dusty desert installations.
Deployment: Southeast Asian archipelagos, Sub-Saharan Africa.
Technical Configuration: Low-frequency pure sine wave inverters featuring toroidal cores, paired with deep-cycle LiFePO4 battery banks and backup generator relays for resilient 24/7 power independence.
Deployment: European and Latin American manufacturing zones.
Technical Configuration: Customized high-capacity on-grid solar systems with intelligent peak-shaving storage inverters, balancing erratic motor start-ups and lowering utility penalty surcharges.
Direct technical trade-offs between core power topologies to inform wholesale procurement specifications.
| Architecture Type | Core Magnetic Topology | Surge Endurance | Optimal Deployment | OEM Customization Scope |
|---|---|---|---|---|
| Low-Frequency Inverter | Heavy Toroidal Copper Transformer | Up to 300% (20s rating) | Heavy inductive loads, deep-well pumps, motors, weak grids | Transformer winding, DC/AC voltages, enclosure IP rating |
| High-Frequency Inverter | High-Speed Switching MOSFETs | 150% - 200% (Instantaneous) | Residential electronics, telecom, light commercial | Firmware logic, interface styling, form factor |
| Hybrid Storage Inverter | Bi-Directional High-Voltage Bus | 200% Peak with Grid Assist | Time-of-use optimization, self-consumption, zero feed-in | BMS protocol mapping, grid-tie certifications, display UI |
| Automated Robotic Cleaning | Brushless DC Dual Motor Drive | High Dynamic Torque | Commercial roofs, desert utility solar parks, agricultural dust | Track width, chassis length, battery chemistry, edge sensors |
Our Beijing R&D engineering center continues to advance industrial clean-tech architectures across four core technological pillars.
Transitioning primary inverter switching topologies to Silicon Carbide (SiC) MOSFETs, targeting 99.2% peak efficiency and a 40% reduction in thermal dissipation requirements.
Deploying solid-state LiDAR and machine vision on next-generation solar cleaning robots for real-time obstacle avoidance and autonomous inter-row bridging on utility tracker systems.
Native integration of 4G/Wi-Fi/NB-IoT microcontrollers across inverters, reporting real-time string voltage, ambient cell temperature, and predicted battery degradation directly to central SCADA.
Validating early-stage Sodium-Ion (Na-Ion) battery chemistries alongside LiFePO4, delivering superior cold-weather discharge rates (-30°C) for extreme climate deployments.
Comprehensive answers regarding factory-direct supply chains, OEM custom firmware, and warranty guarantees.
VMAX POWER is the dedicated export brand of Beijing Multifit Electrical Technology Co., Ltd. Founded in 2009 and based in the Beijing Economic & Technological Development Zone, we operate dedicated R&D labs, production lines, and project engineering teams. Buyers deal directly with factory leadership.
We provide full hardware and software customizability: client logo screening, custom packaging, localized AC voltage/frequency tuning, tailored BMS communication protocols (CAN/RS485), modified low-frequency transformer windings, and custom mounting enclosures.
Shipments can be accompanied by complete CE Declarations of Conformity, TÜV inspection certificates, IEC test reports, ISO 9001 quality audits, factory flash reports for solar modules, and full burn-in QA sign-off documentation.
When clients source turnkey solar systems, our engineering team pre-tests solar panels, charge controllers, storage batteries, and inverters together under simulated load before dispatch, eliminating component protocol mismatches on-site.
Standard trial orders for inverters and cleaning robots have an MOQ of 1 to 5 units, while bespoke OEM private-label branding requires 50 to 100 units depending on chassis customisation. Production cycles typically range between 15 and 25 working days.
We provide comprehensive 2- to 5-year replacement warranties on power electronics and up to 10 years on select battery cells. Replacement modular PCBA boards, toroidal assemblies, and spare parts are dispatched via air courier alongside direct engineer-to-engineer video diagnostics.
Explore our extended factory catalogue of PV generation, lighting, and power electronics engineered for utility, industrial, and municipal infrastructure.
High-yield utility and commercial grid-tied systems featuring smart export limitation and rapid utility-shutdown compliance.
Inquire On-Grid Quotes
Resilient microgrid systems engineered for self-sustained telecommunication masts, remote industrial outposts, and agricultural pumps.
Inquire Off-Grid Specs
Pure sine wave conversion architectures delivering pristine AC power for mission-critical instruments and industrial loads.
Explore Inverters
High-precision MPPT charge controllers delivering 99.5% tracking efficiency with multi-stage battery temperature compensation algorithms.
Request MPPT Specs
Tier-1 high-efficiency monocrystalline PERC and TOPCon photovoltaic modules with certified mechanical load resistance (5400 Pa).
Request Module Pricelist
Industrial-grade outdoor floodlights with die-cast aluminum heat sinks, wide-angle optics, and integrated high-capacity battery units.
View Flood Lights
Architectural landscape solar lighting systems featuring automated dusk-to-dawn sensors and weather-sealed IP65 housings.
Explore Garden Lights
All-in-one solar street luminaires combining high-lumen Bridgelux LED chips, MPPT controllers, and long-life LiFePO4 cells.
Request Street Light QuotesContact our application engineering team in Beijing to request product technical datasheets, full compliance certificates, and customized factory quotations.
